We have been testing our UNOBTANIUM FILAMENT 3D PRINTED X3 AUTO LOCKER for 18 months in various forms of motorsport including the King Of Hammers 2026 with fantastic results. Our Unobtainium ® Filament Reinforced Covers are 25% lighter and have been proven to be 80% stronger than our 6061 Aluminium Side Covers as used in the WINNING X3 at the 2026 King of Hammers.
PETUF (Polyethylene Terephthalate Unobtanium ® Fibre) Filament is an Revolutionary Extreme Strength, Low Cost 3D Printing Filament that produces Fibre Reinforced Components which are 20% stronger than SAE 4140 (Chrome Moly) Steels and 75% stronger than 6061 Aluminium.
PETUF has a much higher operating temperature and costs approximately 50% less than PEEK ® filaments and is commonly available in most countries. Unobtanium Fibre is 125% stronger than Kevlar and 75% stronger than Carbon Fibre.
What’s Included:
🏆3D PRINT FILE - Side Covers
🏆3D PRINT FILE – Heavy Duty OEM Case
🏆3D PRINT FILE – AUTO LOCKER CARRIER
🏆3D PRINT FILE – AUTO LOCKER SPLINED DRIVE FLANGES
🏆PRINT INSTRUCTIONS – ASSEMBLY INSTRUCTIONS
🏆PART NUMBER FOR TIMKEN BEARINGS AND SEALS
NOTE: You will need to set your printer to print at least 50% volume (We highly recommend printing at 100% volume – SOLID)
NOTE: Some things simply cannot (or should not) be 3D printed (Bearings, Oil Seals) – therefore to install the Auto Locker into your X3, you will still need to purchase a set of Genuine made in USA Timken Roller Bearings ($20 each) and the Nitrile Oil Seals ($5 each)
Purchase the print files for $65, Bearings for $20 and Seals for $10 and you are good to go !!
DOWNLOAD 3D PRINT FILES
We have been testing our UNOBTANIUM FILAMENT 3D PRINTED X3 AUTO LOCKER for 18 months in various forms of motorsport including the King Of Hammers 2026 with fantastic results. Our Unobtainium ® Filament Reinforced Covers are 25% lighter and have been proven to be 80% stronger than our 6061 Aluminium Side Covers as used in the WINNING X3 at the 2026 King of Hammers.
PETUF (Polyethylene Terephthalate Unobtanium ® Fibre) Filament is an Revolutionary Extreme Strength, Low Cost 3D Printing Filament that produces Fibre Reinforced Components which are 20% stronger than SAE 4140 (Chrome Moly) Steels and 75% stronger than 6061 Aluminium.
PETUF has a much higher operating temperature and costs approximately 50% less than PEEK ® filaments and is commonly available in most countries. Unobtanium Fibre is 125% stronger than Kevlar and 75% stronger than Carbon Fibre.
What’s Included:
🏆3D PRINT FILE - Side Covers
🏆3D PRINT FILE – Heavy Duty OEM Case
🏆3D PRINT FILE – AUTO LOCKER CARRIER
🏆3D PRINT FILE – AUTO LOCKER SPLINED DRIVE FLANGES
🏆PRINT INSTRUCTIONS – ASSEMBLY INSTRUCTIONS
🏆PART NUMBER FOR TIMKEN BEARINGS AND SEALS
NOTE: You will need to set your printer to print at least 50% volume (We highly recommend printing at 100% volume – SOLID)
NOTE: Some things simply cannot (or should not) be 3D printed (Bearings, Oil Seals) – therefore to install the Auto Locker into your X3, you will still need to purchase a set of Genuine made in USA Timken Roller Bearings ($20 each) and the Nitrile Oil Seals ($5 each)
Purchase the print files for $65, Bearings for $20 and Seals for $10 and you are good to go !!
ENQUIRY FORM